Bravilor B HW Series Left or Right Bulk Fill Coffee Machines
Large amounts of fresh filter coffee quick
Ideal for busy moments such as theatre intervals or hospital canteens.
The individual containers can be transported easily for coffee to be served locally at any moment.
The B HW-series comprises three models (5, 10 and 20 litres).
Within these volumes you can make as much coffee as you like.
The B HW-series have a separate hot water tap.
BHW L/R has one container and one brewing column.
Very user friendly programming and attractive design: a robust stainless steel appearance.
Equipped with stainless steel filter pan, "coffee-is-ready" signal, variety of serving sizes; by the cup, decanter, litres or gallon. Total- and daily counters, descaling system and built-in timer (coffee can be brewed whilst you are absent from the machinery), adjustable brewing time for optimum extraction and optimum safety mechanisms (container- and swivel arm signal).
Options: wall-mounted models, models specially designed for marine use
Quickly brews fresh coffee in large quantities
Robust and quality appearance
Equipped with a "coffee is ready" signal, total and day counters and built in timer
Descale system and optimal security devices
Coffee of consistent quality: The containers control the quality of the coffee
|
Technical Details |
B5 HW L/R |
B10 HW L/R |
B20 HW L/R |
| Throughput/hour (coffee) |
approx. 30 litres |
approx. 60 litres |
approx. 90 litres |
| Throughput/hour (hotwater) |
approx. 20 litres |
approx. 20 litres |
approx. 20 litres |
| Brewing time (approx.) |
10 min. 5 litres |
10 min. 10 litres |
14 min. 20 litres |
| Rated power 400V |
5330W |
8380W |
11440W |
| Dimensions in mm (wxdxh) |
546x570x799 |
645x570x840 |
739x600x947 |
*This machine will be installed by Bravilor
please make sure installation guidelines are followed
To ensure your installation is completed efficiently, please note Bravilors conditions for installation
The Site MUST:
Have the electrical supply within 1 meter of the centre line of the machnies proposed location.
Have the correct electrical supply for the ordered machine ready on site. E.g. single or three phase.
Have a 15mm copper pipe mains water supply terminating with shut off valve incorporating a 3/4 inch BSP connection within 1 meter of the machines centre line at the proposed location.
Have site water pressure within the operating range of 1 -10 bar. (15 - 150psi).
Ensure that if the counter or unit requires any holes drilling to enable the engineer to site the machine, these must be completed before the engineer arrives on site.
Ensure the machine is immediately available to the engineer, within reasonable distance of the installation site. (should this require any machine over 15kg lifting any distance greater than 1 meter assistance must be available)
Ensure the relevant product ingrediants are to hand
The engineer WILL:
Unpack the machine and inspect for transit damage.
Install the machine in its proposed location.
Connect power and water to the machine.
Commision the machine and function test to ensure it is operating to factory specifications.
Set the machine to any requirement the site may have - drink strength, cup size etc.
Train staff in maintenance, cleaning and operation.
Leave the area tidy, with the packaging flat-packed for the sites disposal.
Install Brita water warranty equipment were requested.
Bravilor DOES NOT authorise its service agents to:
Change the power supply cable already attached to the machine.
Connect the units to services over 1 meter away from the machines centre line. This is due to local authority bylaws, in most counties.
Modify the machines functions or programming to alter the machines designed manufactured purpose.
Any such changes without written consent from Bravilor Limited, would immediately invalidate the warranty.
View all products in
Commercial Coffee Machines
Basket is empty
Reviews
