Bolero XL 423 Instant Ingredient Drinks Machine
Bolero XL423 with 4 canisters for 9 various beverages: Coffee, Espresso, Coffee creme, Cappuccino, Chocolate, Cafe au lait, Moccachino, Double espresso and Hot Water.
The Bolero XL boasts an attractive and simple to use design. Beneath the sleek new finish you will find the reliable proven technology you would expect from Bravilor Bonamat. Taking full advantage of the improvements this design has to offer, the Bolero XL is easy to use, maintain and of course… reliable.
At the press of a button you have the drink of your choice: coffee, cappuccino, chocolate, moccachino and of course, hot water.
The Bolero XL… variety at your fingertips.
Features: Coin mechanism: Available in mysterious grey, stardust white, ocean blue:
Technical details Bolero XL 423
Amount of canisters 4 x 1,3 litres
Throughput per hour approx. 240 cups (approx. 30 litres)
Brewing time approx. 11 seconds per cup
Rated power 230V~50/60Hz 2230W
Dimensions (wxdxh) 321x433x592 mm
*This machine will be installed by Bravilor
Please make sure installation guidelines are followed
To ensure your installation is completed efficiently, please note Bravilors conditions for installation
The Site MUST:
Have the electrical supply within 1 meter of the centre line of the machnies proposed location.
Have the correct electrical supply for the ordered machine ready on site. E.g. single or three phase.
Have a 15mm copper pipe mains water supply terminating with shut off valve incorporating a 3/4 inch BSP connection within 1 meter of the machines centre line at the proposed location.
Have site water pressure within the operating range of 1 -10 bar. (15 - 150psi).
Ensure that if the counter or unit requires any holes drilling to enable the engineer to site the machine, these must be completed before the engineer arrives on site.
Ensure the machine is immediately available to the engineer, within reasonable distance of the installation site. (should this require any machine over 15kg lifting any distance greater than 1 meter assistance must be available)
Ensure the relevant product ingrediants are to hand
The engineer WILL:
Unpack the machine and inspect for transit damage.
Install the machine in its proposed location.
Connect power and water to the machine.
Commision the machine and function test to ensure it is operating to factory specifications.
Set the machine to any requirement the site may have - drink strength, cup size etc.
Train staff in maintenance, cleaning and operation.
Leave the area tidy, with the packaging flat-packed for the sites disposal.
Install Brita water warranty equipment were requested.
Bravilor DOES NOT authorise its service agents to:
Change the power supply cable already attached to the machine.
Connect the units to services over 1 meter away from the machines centre line. This is due to local authority bylaws, in most counties.
Modify the machines functions or programming to alter the machines designed manufactured purpose.
Any such changes without written consent from Bravilor Limited, would immediately invalidate the warranty.
View all products in
Commercial Coffee Machines