Bravilor Bolero XL Turbo 302 Instant Ingredient Coffee Machine

Bravilor Bolero XL Turbo 302 Instant Ingredient Coffee Machine

Ideal for busy moments
The speed with which you can fill a decanter makes the Bolero XL Turbo ideal for the busier environment. Because of the high capacity (10 litres boiler) this machine can make a two litres decanter coffee in one cycle. Cups are possible too.

Equipped with separate hot water tap and three canisters. The Bolero XL Turbo offers coffee, coffee strong, decanter coffee, cappuccino, café au lait, moccachino, chocolate, decanter chocolate, hot water, decanter hot water. Modern design with stainless steel housing, fast and simple operation, transparant canisters, energy saving mode and reduced maintenance.

The Bravilor Bonamat hot water system makes the machine less susceptible to scale formation. The machine works with instant or freeze-dried ingredients.

Bolero XL Turbo 302 with 3 canisters and 10 selections, dispensing quantities programmable from 4cl to 2 litres

Amount of canisters: 3 (1 x 3,2 litres / 2 x 1,3 litres)

Brewing time: approx. 75 seconds per 2 litres

Throughput per hour: approx. 40 litres

Rating power 230V~ 50/60Hz: 3500W

Dimensions (wxdxh): 316x507x725 mm

Colour: dark-grey

*This machine will be installed by Bravilor
please make sure installation guidelines are followed

To ensure your installation is completed efficiently, please note Bravilors conditions for installation

The Site MUST:

Have the electrical supply within 1 meter of the centre line of the machnies proposed location.
Have the correct electrical supply for the ordered machine ready on site. E.g. single or three phase.
Have a 15mm copper pipe mains water supply terminating with shut off valve incorporating a 3/4 inch BSP connection within 1 meter of the machines centre line at the proposed location.
Have site water pressure within the operating range of 1 -10 bar. (15 - 150psi).
Ensure that if the counter or unit requires any holes drilling to enable the engineer to site the machine, these must be completed before the engineer arrives on site.
Ensure the machine is immediately available to the engineer, within reasonable distance of the installation site. (should this require any machine over 15kg lifting any distance greater than 1 meter assistance must be available)
Ensure the relevant product ingrediants are to hand

The engineer WILL:

Unpack the machine and inspect for transit damage.
Install the machine in its proposed location.
Connect power and water to the machine.
Commision the machine and function test to ensure it is operating to factory specifications.
Set the machine to any requirement the site may have - drink strength, cup size etc.
Train staff in maintenance, cleaning and operation.
Leave the area tidy, with the packaging flat-packed for the sites disposal.
Install Brita water warranty equipment were requested.

Bravilor DOES NOT authorise its service agents to:

Change the power supply cable already attached to the machine.
Connect the units to services over 1 meter away from the machines centre line. This is due to local authority bylaws, in most counties.
Modify the machines functions or programming to alter the machines designed manufactured purpose.
Any such changes without written consent from Bravilor Limited, would immediately invalidate the warranty.

View all products in Commercial Coffee Machines