This new Quinn Round Top radiator exhibits the smooth rounded top, without any sharp vertical weld seams characteristic of the old model, combining a discreet modern appearance with high performance and classic good looks. The closely arranged water channels ensure a high yield and faster heating.

The Quinn Round Top Radiator is suited to any home and offers you the choice in heat output and size to any application or project coupled with outstanding quality, efficiency and finish.

Quinn Roundtop Features & Benefits

• Using RAL 9016 there is an improved longer lasting paint finish in a cleaner white
• 1.2mm thick steel construction
• Suitable for all central heating systems
• Metric Sizing - 100mm sizing, easier for measuring up etc.
• Low Water Content - Makes for more efficient use
• Four Tappings - Increased installation opportunities
• Can be used as a 2 in 1 radiator
• Double Panel+ also available in heights of 400mm, 500mm, 600mm & 700mm
• Tested to higher standards - working pressure of 8 bars
• 10 year warranty

TECHNICAL CHARACTERISTICS

	Single Convector (K1)		Double Panel (P+)		Double Convector (K2)
Length mm	Code	BTU/Watts	Code	BTU/Watts	Code	BTU/Watts
300	Q11703RT	1199/352	NA	NA / NA	Q22703RT	2244/658
400	Q11704RT	1601/469	NA	NA / NA	Q22704RT	2993/877
500	Q11705RT	2000/586	Q21705RT	2795/819	Q22705RT	3741/1096
600	Q11706RT	2399/703	Q21706RT	3352/982	Q22706RT	4488/1315
700	Q11707RT	2799/820	Q21707RT	3911/1146	Q22707RT	5236/1534
800	Q11708RT	3201/938	Q21708RT	4471/1310	Q22708RT	5986/1754
900	Q11709RT	3601/1055	Q21709RT	5027/1473	Q22709RT	6734/1973
1000	Q11710RT	4000/1172	Q21710RT	5587/1637	Q22710RT	7481/2192
1100	Q11711RT	4399/1289	NA	NA / NA	Q22711RT	8229/2411
1200	Q11712RT	4799/1406	Q21712RT	6703/1964	Q22712RT	8946/2630
1400	Q11714RT	5601/1641	NA	NA / NA	Q22714RT	10474/3069
1600	Q11716RT	6399/1875	NA	NA / NA	Q22716RT	11969/3507
1800	Q11718RT	7201/2110	NA	NA /NA	Q22718RT	13000/3809
2000	Q11720RT	8000/2344	NA	NA / NA	Q22720RT	14444/4232

Click here to see our Heat Calculator

Additional Info for the Quinn Roundtop Radiator

CONNECTIONS
Each Round Top radiator is manufactured with four 1/2” BSP TBOE connections. AIR VENT
Each panel is supplied with a built-in bleed screw, which is located under a plastic cover on the back of the panel.

BRACKETS
All radiators in the range are supplied with two or more brackets depending on the length.

BRACKET LUGS
Two pairs of lugs are fitted on radiators up to and including 1600mm long. A third pair of lugs is fitted centrally on radiators 1800mm long and over.

OUTPUTS
All radiators have been manufactured and tested in accordance with BSEN 442.

FINISH
Every Quinn Round Top radiator undergoes an intensive pretreatment process to protect against rust. The radiators are then finished with Epoxy Polyester Powder paint similar to RAL 9016 which may be over painted if required.

QUALITY
All radiators are manufactured under a BS EN ISO 9001:2000 quality system accepted by BSI.

WARRANTY
All radiators are supplied under warranty for a period of ten years in respect of defective materials or manufacture.

TESTING
All radiators are individually pressure tested to 10.5 bar and are suited for a working pressure up to 8 bar.

TAPPING-TO-TAPPING DIMENSIONS
All tapping-to-tapping dimensions may be obtained by subtracting 5mm (1/4”) from the nominal radiator length (accurate to + 2mm).

INSTALLATION
For indirect systems or closed circuits only at a working pressure not exceeding 10 bar.

View all products in Round top radiators