The Speedflow premier can be wall mounted or floor mounted, offering all the features of the Speed-flow Standard, the Speed-flow Premier adds features at an even more competitive price. These include a stainless steel flange element, power-on switch and neon power-on indicator. The Speed flow is suitable for use with regular taps. Choice of 5, 10 or 15L capacities with a 2.0kW element for rapid heat up and an external temperature control.
High performance, multiple sink capability, can be used with regular taps, the additional features of a Speed-flow Premier include a stainless steel flange element, power-on switch and neon power-on indicator.
Unvented water heaters are fast becoming the choice for small commercial applications
The Speed-flow is a new, stylish unvented water heater packed with useful features:
2.0kW element for rapid heat up
External temperature control
Neon element-on indicator
Glass-lined vessel with magnesium anode
Manually re-settable thermal cut-out
Wall mounting or floor standing options
Expansion vessel dimensions L200mm x D150mm
Pressure relief valve included
Available in 5, 10 and 15ltr, please see options
Approx 12 minutes
Approx 23 minutes
approx 35 minutes
What is the warranty of the water heater?
One year manufacturer’s warranty, if it becomes faulty within the year we will replace with new!
I have a 13amp power supply will the Speedflow be suitable?
Yes the Speedflow has a 2kW element fitted and requires a 13amp power supply. However if you have limited power supplies we can supply a 1.2kW element that is available for the 10 & 15ltr models for restricted load applications, please call our customer services team on 0844 884 2900!
Do I need any accessories for installation?
The Speedflow can be plumbed straight in to the cold water supply; and hot water supply straight to standard taps, however we would always recommend that it is installed with the 2ltr Expansion Vessel and Check Valve. The expansion vessel may be required if the cold supply pipe is not long enough to allow for the expansion of water when it is heated, your plumber will be able to advise you best if the expansion vessel is required!
What temperatures should I expect from this water heater?
The maximum water temperature delivered by this water heater - 75C!
What is the reheat time of the water?
The reheat time of Speedflow premier 5ltrs will be less than 12 minutes, 10ltr 23minutes and the 15ltr 35minutes, this will also depend on the cold water supply temperature!
Is it suitable for high pressure water supplies?
The water heater will cope with fluctuating water pressures from 0.5 to 4bar pressure however to prolong the life of the water heater it is always advisable that you install a pressure reducing valve SF4 kit in the cold water supply if you have any enquiries, please call our sales team on 08448842900 before you purchase!
Can the water heater be fitted upside down?
No the water heater must be installed the correct way up, please call our sales team on 08448842900 for any enquiries!
Do you have spare parts for the water heater?
Yes we carry spares for the Speedflow water heaters, please call our sales team on 08448842900 for any enquiries!
What pipe fittings do I need for the water heater?
The pipe fittings are standard UK 15mm (½” BSP) pipe fittings!
Can I install the Speedflow in an outbuilding that is not heated?
Yes they are ideal for Port-a- cabins or rooms that have very little heating!
If I have a problem with the Speedflow who do I contact?
Hyco the manufacturers have a customer help line given within the hand book, or please call our customer services team on 0844 884 2900 and we will help you with any problems you may have with the Speedflow water heater!