Dexpro Delux Inline Instant Water Heater - 3.5kW
- Digital Display, Accurate Touch Control
- Supplied with standard flexi hoses or push fit on request
- Flow Restrictor/ Spray Nozzle Required
- Power: 3.5kW
- Energy Rating Class A
- Slimline water heater
Unique Slimline Instant Water Heater "can be installed in any orientation, up ~ down ~ sideways"
The Dexpro Delux Instantaneous water heater is ideal for installations where limited space is available which requires instant hot water on demand. The maximum projection is just 50mm. This is the ideal solution to have for hand washing in commercial areas such as offices, shops, factories, schools, hospitals and much more.
The unit is designed with a digital display which displays the actual temperature with accurate touch control. The temperature rise is affected by the water flow rate meaning the faster the flow the cooler the temperature this is why it is recommended that the flow restrictor is used in conjunction with this water heater to obtain the best performance. This water heater is supplied with two flow restrictors M22 & M24.
- Compact Slimline Mini Instant Water Heater
- Supplied with standard flexi hoses or push fit on request
- Can be installed "ANY" orientation
- Supplied flexi hoses 1/2" BSP x 2
- Easy installation uses standard 1/2" BSP fittings
- Class A Energy Rating
- Suitable for Hand Washing
- For use in Domestic & Commercial areas
- Digital Display
- Accurate Touch Control
- Flow Restrictor/ Spray Nozzle to be used (supplied)
- Max Power: 3.5kW
- Aluminum Heating Element
- ½" Inlet/ Outlet Connections
- Cable Pre-wired
- Height: 150mm
- Width: 210mm
- Depth: 50mm (Max Projection!)
- Also Available in 5.5kW
|Type||Instant Water Heater|
|Current Intensity (A)||15.2|
|Minimum Cable Size (mm)||1.5|
|Minimum Water Pressure (Bar)||0.6 (8.7 PSI)|
|Maximum Water Pressure (Bar)||6.5 (94 PSI)|
|48C Flow Rates (l/min) *||1.5|
|40C Flow Rates (l/min) *||2.0|
|35C Flow Rates (l/min) *||2.5|
|Height / Width / Depth (mm)||150 / 210 / 50|
|Installation Type||Any orientation|
|Water Proof Rating (IP)||24|
* Please note: Flow rates are calculated using minimum water inlet temperature of 15C
What water temperatures can i expect with this water heater?
"All depends on the water inlet temperature". The Dexpro is supplied with M22 and M24 flow restrictors. The M22 flow restrictor will limit the flow of water to 1.5 litres per minute and the M24 flow restrictor will increase the flow to 2.5 litres per minute. If the cold water inlet is 10C expect 44C at 1.5ltr min. If the inlet water temperature increases (during summer months) expect 49C at 1.5ltr min.
Can this instant water heater be fitted upside down above or under the sink?
Yes it can, the Dexpro can be installed in any orientation, up - down - sideways, etc, so can never be fitted the wrong way. However the digital display on th efront is fixed so if the water outlets are facing upwards the temperature display would be upside down, please see attached downloads.
Do i need an expansion vessel for this instant water heater?
No, ALL Instant water heaters do not require an expansion vessel!
What are the thread sizes?
Male 1/2" BSP standard plumbing fittings for an easy installation! This water heater is supplied with 2 x flexi hoses
Can the Dexpro water heater be fitted with a 13A plug?
No, The Dexpro 3.5kW water heater requires a minimum of "15.2A" power supply with a minimum of 230 Volts (Fused Spur Point required) The cable size should be minimum 2.5mm2, pvc twin + earth, and protect the circuit with overcurrent protection device (OCPD)
Can this water heater be used with standard taps and mixer taps?
Yes it can be used with "standard taps" and "mixer taps" as long as the taps have spray nozzles fitted. The accessories we supply include 2 types of spray nozzle 22 & 24 and will fit most standard size taps. Please check your tap nozzle type before you purchase this water heater. Please note without a nozzle fitted on your tap the water flow rate will be no more than a trickle!
What temperature and flow rates can i expect from this water heater?
This water heater will achieve water temperatures of 49C maximum flow rate of 1.5 - 2ltr/min with M22 nozzle fitted to tap (calculated on a water inlet temperature of 15C)
Do you need any special fittings with this water heater?
No, standard 1/2" BSP fittings. This instant water heater is "unvented" meaning it can be connected directly to cold water mains therefore no other special accessories are required.
I have high fluctuating water pressures will this effect the performance of the water heater?
This water heater is ideal for controlling fluctuating water pressure from 1 - 6 Bar
I would like to supply the water heater from a tank in my loft space will this still work?
This water heater needs a minimum "water pressure" of 1 Bar this is equivalent to 14 PSI. Always make sure the water supply is sufficient enough or the performance of this water heater may be effected. For gravity fed water supplies the tank must be at-least 5m higher than the water heater itself!
Can this water heater be used to feed more than one sink?
This water heater is to be used for one outlet only a small sink or hand wash basin. Always install the water heater as close to the outlet as possible. Long pipe runs will effect the performance of the heater!
I have hard water supply will this water heater cope?
Suitable for hard water areas, this water heater is fitted with in-line filter that should be cleaned regular if you are in a hard water area.
What power and voltage does this water heater require?
This water heater needs a minimum power of 15.2A / 230V, if powered any less than this then the performance of the water heater "will be" effected.
What is the warranty of this water heater?
The warranty is 2 years, if it fails within this period from date of purchase we will replace with new once we have received the water heater if it is found to be faulty a replacement will be delivered next working day
Can i return if the water heater is unsuitable?
Yes as long as the water heater is unused and in the original box. Return to: Unit 2, North Point Business Park, Off Selby Road, Eggborough, North Yorkshire, DN14 0JT, with a reference to your order number. Email email@example.com or call 0800 083 0373 to advise us that you are returning. Once we have the water heater back, it will be checked and if unused a full refund will be given excluding any delivery costs we have incurred
What are the sizes of the water heater?
The sizes are in our technical page: Height 150 mm, Width 210 mm, Depth 50 mm
Our Delivery Charges and times are explained:
All deliveries have a standard charge of £7.99 + VAT up to 20kg. Where stated, certain products are delivered FREE of charge (mainland UK only*). Check the description of the desired product and if it says free delivery then you will not be charged for delivery*
Where the weight is over 20kg we reserve the right to charge more dependent on product type and delivery postcode, our customer service team will be in touch and inform you of any extra charges before we despatch.
All products will have a delivery time stated in their description. Next Working Day - these products will be delivered Next Working Day if ordered before 12.00, or in certain circumstances up until 4:00 pm. Please call if you require a Next Working Day and we will try our best to get it to you. Certain products will state within 48hrs, within 3 Days or within 5 days. These products will be delivered within the time stated. If you require delivery on a certain day please put this in the comments and we will aim to deliver on that day.
Certain products such as radiators are delivered after 5 working days, when purchasing a radiator please put in the desired delivery date which is 5 working days after ordering. In some cases, stock permitting, we can get radiators out sooner. Please call or put in the customer comments if you need something urgently and we will try our best.
We can arrange for a Saturday delivery for certain products, please call 01977 663331 for more details.
Please note: Although we will do our utmost to deliver your product in the time stated we cannot be held responsible for any unforeseen delays. Please do not book a plumber, electrician, etc until you have received the goods as we will not be held responsible for their time. Please read our terms and conditions for further details.
additional charges may be applicable dependent on your location please double-check with our customer service team