You have no items in your shopping basket.
Genuine Redring cold water pack!
This kit is everything you will need to ensure the expansion of the water is maintained within the pipework. The kit includes the expansion vessel this will absorb the expansion of the heated water, the kit also includes the check valve this prevents any expanded water from entering other water supplies in the line and the kit also includes the pressure reducing valve, this will ensure the water heater receives the correct pressure of water and will ultimately prolong the life of the heater and protect the water heater from fluctuating water pressures!
Redring Cold Water Control Pack, to be used with water supply pressures above 6bar or where cold water supply pipe is not long enough to accommodate expansion of hot water. E.g, EW15 - less than 4.5m of 15mm pipe. (EW10 - less than 3m) If the cold water supply pipe is 22mm diameter then these measurements can be halved!
Suitable for the MW and EW range of Redring unvented water heaters
- Code: 783101
- Diameter: 120mm, Height: 235mm
- Expansion vessel
- Check valve
- Pressure reducing valve
- Redring genuine cold water control pack