shopping basket
basket
item - £0.00

You have no items in your shopping basket.

Subtotal
£0.00

Redring Powerstream Unvented Instantaneous Water Heater

Be the first to review this product

Quick Code: # 12228
£109.20 ex. VAT £131.04 incl. VAT

* Required Fields

Availability: In stock

Warranty: 2 Year
Delivery: Next Working Day
  • Economical to run
  • 3 models available 9.5kW, 10.8kW and 12kW
  • Delivers instant hot water at point of use
  • Compact size, allowing you to tuck them away
  • No expansion kits or accessories required
  • Suitable for 2 basins or 1 basin & 1 shower

Details


No expansion kit or accessories required and can be installed upright or lengthways whichever is convenient for plumbing and wiring!


The Redring Powerstream is ideal if you don't have the room or budget for a centrally stored hot water cylinder, as the compact size of this unit allows it to be tucked under the sink or in a cupboard. Economical to run and no standing heat loss as happens with water cylinders. The Redring delivers instant hot water at point of use, supplying up to 2 basins or 1 basin and 1 shower with instant hot water. Unique water flow operated power switch. Choose from 3 different outputs.


Simple to install, allows you to supply up to 2 basins or 1 basin & 1 shower with instant hot water. Supplied with a 15mm compression fitting water isolator!


  • When supplying basins, please use spray taps
  • Ideal if you don't have the room or budget for a centrally stored hot water cylinder
  • Compact size, allowing you to tuck them away under the sink or in a cupboard
  • Economical to run; they don't suffer from standing heat loss like water cylinders
  • Flow stabiliser/service valve & fixing pack supplied
  • Impact resistant moulded cover, with corrosion resistant zinc coated steel back plate
  • Unique water flow operated power switch
  • Half power selection available on installation
  • Thermal cut-out protection
  • Approvals, WRAS, BEAB & CE
  • Simple to install, 3 models to choose from
  • If the unit is to supply a basin, we recommend that you use standard spray taps
  • Designed to accept 10mm supply cable & for long cable runs greater than 10M
  • If the unit is to supply a shower, we recommend the Redring shower mixer kit

Additional Information

SKURP1-793201
Power (kW)No
Btu'sNo
BrandRedring
Model kWCable SizeFuse (A)kW loading 230/240VFlow Rates 4L/minFlow Rates 5L/minFlow Rates 6L/minSize: W:D:H mm
9.510 mm240A8.7~9.539~54 C32~47 C28~42 C307-74-160
10.810 mm245A9.9~10.844~58 C36~51 C31~46 C307-74-160
1210 mm250A11~1248~63 C39~54 C34~49 C307-74-160

    What is the warranty of the Redring Powerstream ?

    Two years manufacturer’s warranty!

        Will the Redring Powerstream supply two basins simultaneously?

        Yes, however please make sure that the head is the same at each outlet if they are to be used at the same time. The pipe runs must be the same length, if not then one outlet will take all the hot water!

            Will the Redring Powerstream supply a basin or sink mixer taps?

            Yes, however Redring recommend that you use ¼” turn lever control spray taps, code 85-793616!

                Is the Redring Powerstream suitable for a shower supply?

                Yes the Redring Powerstream range are suitable for supplying a shower, however they are not suitable for shower mixers, they must be used with the Redring Shower Mixing Kit please see related products or code 85-793620!

                    Can the Redring Powerstream be installed anyway up?

                    The Redring Powerstream range can be installed upright or lengthways whichever is convenient for plumbing and wiring!

                        What side is the cold water inlet on the Redring Powerstream?

                        The cold water inlet is on the right hand side as you look at it installed on the wall!

                            Can the Redring Powerstream be installed above or below the sink or basin?

                            The Redring Powerstream range can be installed under or over the sink or basin!

                                Do I need any accessories for the Redring Powerstream?

                                No accessories required. The Redring Powerstream just needs a water isolator valve that is supplied with the unit. However if a non-return valve is fitted in the inlet feed to the Powerstream then the installation should include a 3.5bar pressure reducing valve and a 6bar pressure relief (expansion) valve!

                                    I have very high water pressure will this affect the Redring Powerstream`s performance?

                                    The Redring Powerstream instant water heaters have an inbuilt water stabiliser so it will regulate fluctuating water pressures ranging from 0.7bar up to 10.3bar. The water isolator or service valve supplied can also be used to regulate the inlet water pressure this will reduce the cold water inlet flow and will help increase the water temperature at the tap. If you are unsure of your cold water supply pressure you can ask your water supplier to check this for you free of charge!

                                        I have a 13amp power supply will the Redring Powerstream be suitable?

                                        No the Redring Powerstream, 9.5kW requires 40amp, 10.8kW requires 45amp and the 12kW requires a 50amp supply, please note each water heater requires an independent power supply!

                                            Can you fit a UK 13amp plug to the Redring Powerstream water heater?

                                            No all instant water heaters must be installed by a competent electrician and for safety reasons they must be hard wired to a suitable power supply!

                                                What size cable do I need for the Redring Powerstream water heaters?

                                                The 9.5kW and 10.8kW requires to 10mm2 cables and the Redring 12kW requires 10mm to 16mm2, always seek advice from a qualified electrician!

                                                    What is the maximum cable size the Redring Powerstream will accept?

                                                    Maximum cable size the Redring Powerstream will accept is 16mm2!

                                                        I don’t have a mains water supply can I use the Redring Powerstream water heater?

                                                        No the Redring Powerstream must be connected to the mains water supply only!

                                                            I have a problem with lime scale will the Redring Powerstream be suitable?

                                                            The Redring Powerstream has been designed to operate efficiently with all mains water supplies!

                                                                Do you have spare parts for the Redring Powerstream water heater?

                                                                Yes we carry spares for the Redring Powerstream water heaters, please call our sales team on 08448842900 for any enquiries!

                                                                    What pipe fittings do I need for the Redring Powerstream water heater?

                                                                    The Redring Powerstream pipe fittings are standard UK fittings, your installer will need 2 x 15mm compression fittings to connect the inlet and outlet pipes. The Redring Powerstream is supplied with a cold water isolating compression fitting!

                                                                        Can I install the Redring Powerstream in an outbuilding that is not heated?

                                                                        Redring do not recommend that the water heater is installed in a room where it may be subject to freezing!

                                                                            If I have a problem with the Redring Powerstream who do I contact?

                                                                            Redring have a customer help line on 08443727766 (UK Only) they will need to know the Model number and serial number on the bottom of the heater. Redring will also want to know when and where you purchased the goods, if you forget your date of purchase please call our customer services team on 08448842900 and we will help you with all the information you require.
View Filemodel sheet-RP1-793201    Size: (325.03 KB)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Reviews