Prestige Low Surface Temperature Towel Warmer White

The MOA White low surface temperature towel rails are recommended for use in care homes, hospitals, rented accommodation or anywhere that the general public may come in to direct contact with a heated towel rail. Turning on the MOA element will warm the towel radiator up to the pre-set temperature of approximately 43C. On the control panel the blue LED lights up to indicate the current (ON) status of the element. The element will automatically turn itself off until the temperature drops below 43C, and will continue to operate thermostatically.


The MOA also has a timer function button, this will activate the 2 hour timer function and automatically turns itself off after 2 hours. The timer mode is indicated with a red LED light. Pressing the timer mode again will deactivate the timer function and revert back to the standard heating mode blue LED. Automatic


The MOA also has an antifreeze function, as long as the element is connected to the mains supply the temperature sensor continues to control heating at medium temperature. This means that the antifreeze function remains active when the heater is turned off. As soon as the temperature around the sensor drops below 6ºC the MOA will switch itself on and prevent the heating medium from freezing!

Ideal for care homes or where low surface temperatures are essential

Stylish low surface temperature thermostatic element pre-set to 43C!

Antifreeze function protects against radiator temperature falling below 6ºC

Element can be left switched on permanently @ low cost heating!

Available widths: 400, 450, 500 & 600mm

Available heights: 600, 800, 1000, 1200, 1400, 1600 & 1800mm

Low standby power consumption

Double overheating protection

IPX4 suitable for zone two bathrooms

2 hour timer function

Colour match power cable

Outputs: 200W and 400W

½” BSP element fittings