shopping basket
item - £0.00

You have no items in your shopping basket.


Zip Aquapoint lll Water Heater 5 Litres 2.2kW - AP305

More Views

Water Heater Zip Aquapoint lll 5 Litres 2.2kW

Be the first to review this product

Quick Code: # 12256
£125.68 ex. VAT £150.82 incl. VAT

Availability: In stock

Warranty: 1 Year
Delivery: 48hrs
  • Can also be used in conjunction with sensor operated taps
  • Hot water for one outlet
  • Thermostat: Adjustable 7C to 75C
  • Ideal for aggressive water conditions
  • Suitable for 1 basin


used with standard mixers & taps, suitable for one hand-wash basins or one small sink

The Zip 5ltr unvented water heater is ideal for hard water areas and is to be used with standard mixers and taps. Connects directly to the cold water mains supply using standard BSP fittings. The Zip 5ltr will supply one small kitchen sink or one hand wash basins. Easy to use selective thermostatic temperature control range from: 7C to 75C and can also be used in conjunction with sensor operated taps. The reheat time from cold is >7min 70% vol, therefore this water heater will supply in excess of >30 litres per/hr. Supplied with the expansion pressure relief valve! The minimum length of cold water pipe required to avoid using the expansion kit for the 5ltr is:15mm pipe = 1.37m and using 22mm pipe = 0.6m. The available accessories listed are optional to your requirements, always seek advice from a qualified plumber

  • Zip Aquapoint lll unvented, multipoint 2.2kW water heater
  • Hot water for one outlet used with standard mixers and taps
  • Insulation: high performance, high density, CFC- free, polyurethane foam
  • Pressure and temperature relief valve designed to operate at 7 bar & 90C
  • Complies with LVD and EMC directives, CE endorsed, & WRAS approved
  • Can also be used in conjunction with sensor operated taps
  • The water connections are 1/2" BSP at the top of the appliance
  • Water tank: 1.8mm glass enamelled steel, tested to 12 bar
  • Ideal for aggressive water conditions
  • Maximum working pressure of 6 bar
  • Reheat time 7 minutes for 5ltr, >30 ltr/hr
  • Thermostat: Adjustable 7C to 75C
  • Expansion relief valve supplied
  • Suitable for 1 basins or 1 small sink
  • H376mm: W256mm: D260mm
  • Weight: Empty 6.7kg, Full 12.7kg
  • Power: 220-240V / 50Hz / 13A

View all products in Under Sink Water Heaters

Additional Information

Power (kW)No


Model N0.Power (W)Height (mm)Width (mm)Depth (mm)Weight (kg)Fuse (A)Re-heat time (70% vol.)Capacity (ltr)Capacity (per/hr)Temp (C)
AP3/052,2003762562606.7137min530ltr7 - 75

    What is the warranty of the water heater?

    One year manufacturer’s warranty!

      Do i need to purchase an expansion kit?

      If the cold water supply pipe to the water heater is longer than 4ft - (1.2m) then the expanded water can be accommodated and no expansion kit is required!

          I have a 13amp power supply will the zip 5ltr be suitable?

          Yes the zip 5ltr has a 2kW copper element fitted therefore requires a 13amp power supply!

              Do I need any accessories for installation?

              The zip 5ltr can be plumbed direct into the mains cold water supply installation is quick and easy!

                  What is the reheat time of the water?

                  The reheat time will be less than 12 minutes and the maximum water temperature delivered by this water heater - >75C!

                      Is it suitable for high pressure water supplies?

                      The water heater will cope with fluctuating water pressures from 0.5 to 4bar pressure however to prolong the life of the water heater it is always advisable that you install a pressure reducing valve in the cold water supply if you have any enquiries, please call our sales team!

                          Can the water heater be fitted upside down?

                          No the water heater must be installed the correct way up and has been designed for floor / wall mounting only!

                              Do you have spare parts for the water heater?

                              Yes we carry spares for the water heater, please call our sales team!

                                  What pipe fittings do I need for the water heater?

                                  The pipe fittings are standard UK 15mm (½” BSP)

                                      Can I install the zip 5ltr in an outbuilding that is not heated?

                                      Yes they are ideal for Port-a- cabins or rooms that have very little heating; the zip has a frost protection setting!

                                          If I have a problem who do I contact?

                                          Zip the manufacturers have a customer help line given within the hand book, or please call our customer services team and we will help you with any problems you may have!

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Reviews