shopping basket
basket
item - £0.00

You have no items in your shopping basket.

Subtotal
£0.00

Zip Instant Boiling Chilled Filtered Water Tap For Home

Be the first to review this product

Quick Code: # 12500
£3,774.00 ex. VAT £4,528.80 incl. VAT

Availability: In stock

Warranty: 2 Years
Delivery: 48 Hours
  • Top mounted drinking water controls for convenience and safety
  • Press the red (boiling) or blue (chilled) levers to fill cups or glasses
  • Pull levers forward for hands-free measured delivery into larger vessels
  • Superior energy saving features

Details

The New Zip HydroTap all In One boiling, Chilled, Filtered, hot & cold water from one tap Power-Pulse energy saving technology reduces power consumption by allowing the system to electronically regulate its power during high and low usage periods. This saves energy whilst maintaining the tightest possible temperature control.

Programmable 24/7 Timer Pre-set the power on and power off times (once each day) for those periods when the HydroTap will not be used such as overnight or at weekends.

Inactivity Sleep Mode. The boiling system can be pre-set to power down after 2 hours of non-use but will still retain stored boiling water at an energy-saving 64C. Typical system daily running costs less than13p with sleep mode active for 10 hours.

Low light Sleep Mode An integral light detector can be set to automatically activate sleep mode (as above) when room lights are switched off, returning to normal operation when the lighting is switched back on.

Hibernation Mode. When activated allows the entire system to totally power down after 2 hours of non-use.

Easy reactivation from all four of these modes by pressing the boiling or chilled levers.

Superior sub-micron filtration ensures crystal clear, great tasting, healthier water.

  • Removes suspended impurities smaller than one thousandth of a millimetre.
  • Removes chlorine plus other tastes and odours.

  • The Zip Hydro Tap All-in-One Residential Systemis designed to service one or two sinks.Requires a 50 mm hole for tap installation.

    Plumbing should be installed by a competent person in accordance with the fitting instructions supplied and UK Water Regulations.Water supply must be potable (drinkable)with a minimum pressure of 0.7 bar.If pressure exceeds 7 bar a pressure limiting valve must be fitted. The under sink system must be located within 1 metre of the tap.Under sink connection tubing to the tap must be taut for proper drainage and never be looped or coiled. An isolating valve should be installed between the supplies and the system.

    Electrical should be installed by a competent person in accordance with the fitting instructions supplied and UK Electrical Regulations.System should be connected to a convenient 13A plug or fused spur. Power supply 220V to 240V AC 50 Hz,

    It is essential that the cupboard containing the under sink unit is adequately ventilated as poor circulation will adversely affect the performance of the Hydro Tap. Cupboard doors must be offset all round using the 4 mm buffers provided.The under-sink system must be installed with service access clearances of 50 mm left and right, 220 mm above and 65 mm rear.

    Integral sub-micron filter easily accessible for replacement. Note that use of this filter in locations with excessively high levels of sediment in the water supply may significantly reduce filter life. In such situations a 5 micron filter may be substituted.In hard water areas where mineral scale accumulation is an issue consideration should be given to the maintenance required. We recommend the use of the Zip Professional FL1100 scale filtration system.

    Features
  • Use in place of mixer taps to de-clutter and simplify kitchen design.
  • For use with all standard domestic hot water systems.
  • Top mounted drinking water controls for convenience and safety.
  • Press the red (boiling) or blue (chilled) levers to fill cups or glasses.
  • Pull levers forward for hands-free measured delivery into larger vessels.
  • Child safety lock, requiring adult finger-thumb operation, can be activated if required to control boiling water delivery.
  • Additional electronic boiling water isolation safety feature also provided.
  • Separate control lever to dispense hot, cold or mixed warm water.
  • Superior energy saving features
  • Boiling chamber 1.8 Ltr, Chilling chamber 1.8 Ltr, Total rating 1.8 KW.

  • Technical Features
  • Open outlet boiling system delivers:Boiling water factory set at 98C and adjustable from 68C 99C. Chilled water factory set from 7C 11Cand adjustable up to 14 C.
  • Fan cooled condenser chilling system using R134A refrigerant.
  • High quality copper tanks.
  • Long reach tap spout swings 120 for convenience.
  • Tap LEDs indicate system status,temperature and filter replacement.
  • Base unit display aids set up and provides detailed system information.
  • Additional Information

    SKUAN160/175G
    Weight10.0000
    Power (kW)No
    Btu'sNo
    BrandZip
    GTINNo
    View Filemodel sheet(hydro taps)-B0F    Size: (502.02 KB)

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    Customer Reviews