shopping basket
item - £0.00

You have no items in your shopping basket.


Zip Varipoint ll Deluxe Oversink Water Heater 2.2kW

Be the first to review this product

Quick Code: # 12248
£286.50 ex. VAT £343.80 incl. VAT

* Required Fields

Availability: In stock

Warranty: 5 Year
Delivery: 48 Hours
Varipoint Deluxe do not require an anode or regular inspection!
  • Energy efficient hot water heater, fit & forget
  • Water heaters for single or multiple outlets
  • Water tank: heavy gauge copper
  • Pressure tested at 16 bar
  • CE endorsed WRAS approved


    For use with high incoming water pressures exceeding 4 bar

    The Zip Varipoint Deluxe ll with frost protection setting to protect the heater when not in use and a manually resettable over-temperature safety cut-out. Energy efficient hot water, with a 5 year onsite repair or replace warranty. The water tank is made from heavy gauge copper and pressure tested to 16 bar. Complete with wall mounting brackets, the Zip Varipoint ll Deluxe is very energy efficient , fit and forget water heater that connects directly to the cold water supply and is to to be used with standard mixers and taps. The 10 litre will provide enough hot water for two hand wash basins simultaneously or one large sink. The 15 litre will supply enough hot water for three hand wash basins simultaneously or one commercial sink. For use with high incoming water pressures exceeding 4 bar then we would recommend the use of the AQ3 pressure reducing valve with this water heater!

  • Zip Varipoint ll un-vented water heaters for single or multiple outlets
  • Manually re-settable over temperature safety cut-out set at 95C
  • Water tank: heavy gauge copper, pressure tested at 16 bar
  • Insulation: pressure injected polyurethane foam
  • Case: high impact resistant white plastic
  • Used with conventional taps or mixers
  • Energy efficient hot water, fit and forget product
  • For water pressures above 4 bar AQ3 is required
  • CE endorsed WRAS approved
  • Complete with wall brackets
  • Power: 2.2kW / 50Hz / 240V / 13A
  • Standard 15mm plumbing fittings
  • 10 litre suitable for 2 hand wash basins or 1 sink
  • 15 litre suitable for 3 hand wash basins or 1 sink & 1 basin simultaneously

  • Please note: If the expanded hot water in the tank can be accommodated within the cold water supply pipe work and provided that no check valve, stop valve prevents the reverse flow then no expansion kit is required for the 10 or 15 litre! Where the expanded water cannot be accommodated in the cold water supply pipe work and the static water supply pressure is under 3.5 bar, fit accessory pack AQ2 - Expansion Vessel & Check Valve 2 Litre Capacity. Where static water pressures are likely to exceed 3.5 bar fit accessory pack AQ2 and AQ3 - Zip Pressure Reducer & Line Strainer

Additional Information

Power (kW)No

 CodeDescriptionCapacity (Litres)Height (mm)Width (mm)DepthEAN
VP103Oversink Water Heater103004522855036764322015
VP153Oversink Water Heater153004522855036764322022




    How do i know if i need any accessories?
    Your plumber will be able to advise you best, however as a rule of thumb if your cold water supply has no restrictions the expanded hot water can be accommodated here and therefore you may not need the AQ2 kit!

    Do i need to purchase the AQ1?
    No the pressure & temperature relief valve are supplied with every new water heater!

    When do i need the AQ2?
    The AQ2 is only required if the hot water in the tank cannot be accommodated in the backflow in the cold water supply pipework, however installing the AQ2 kit will help protect the water heater and prolong the service life!

    What is the AQ3 accessory?
    This is required if your cold water supply pressure is greater than 4 bar, the AQ3 will control down the incoming water pressure and help prolong its service life!

    Can i fit the AQ3 without the AQ2?
    Yes, however if the AQ3 is installed then there still must be enough free pipework to allow for the expanded hot water from the tank to AQ3. The 10 litre will need minimum of 3m and the 15 litre will need a minimum of 5m pipework free from any restrictions!

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Reviews