Twin Finn Hutchinson Central Heating Designer Radiator - Black
- 100% Plastic Free Packaging
- Fins are Ideal for lower flow Boiler Systems
- Central heating wet system radiator
- Ideal for rooms where space is limited
- Suitable for microbore plumbing
- Outputs from 3,454 to 9575BTU/hr
- Finish: Black, Matt, Gloss, Semi Gloss and Textured
Twin Finn Hutchinson Central Heating Designer Radiator - Black
With modern properties increasingly utilising 8–10mm microbore pipework, Twin Finn radiators are engineered to operate efficiently within these systems, providing optimal heat transfer and reliable performance.
This radiator is often used in rooms where space is an issue, maximum width 260mm. Supplied with 3 x integral floor wall support fixings. The Finns are spaced evenly 10mm apart on average 90 Finns per meter length.
Smooth Matt Black: Exceptional durability and sleek appearance. This finish was originally developed for automotive components like roof racks, grille guards, bumpers, mirror housings, and wiper arms, this coating is trusted to protect steel constantly exposed to the elements. Its high-performance finish offers outstanding resistance to wear, weathering, and corrosion — all while maintaining a clean, uniform look.
Textured Black: The most popular finish, shown in the product image, a matt black finish with a specialized coating that dries with a tactile, non-smooth finish—such as a fine granular, hammered, or wrinkled surface.
Gloss Black: This finish provides a highly reflective, shiny, and rich finish that makes colours pop and highlights sharp lines.
Satin Black: Sits in the middle of the sheen scale; it offers a smooth, subtle, low-maintenance look with a slight sheen, concealing fingerprints and minor scratches much better than gloss
- 100% Plastic Free Packaging
- Illustration image: Textured Black finish
- Central heating wet system radiator
- Finns work perfectly with 8-10mm Microbore Boiler Systems
- Ideal for heating rooms where space is limited
- Supplied complete with welded steel wall - floor supports
- Supplied with brass vent
- T50 - 3,454 to 9,575 Btu/hr
- T40 - 2,065 ~ 7,033 Btu/hr (Heat Pump)
- 3 x steel wall fixing brackets
- Adjustable sleeving kits are available for all Fin central heating radiators
- Bespoke sizes 2500mm+ available on request
- Options: Smooth Matt, Textured, Semi Gloss and Gloss Balck
- HS/Commodity Code: 7322 9000 90
Please note: Finn Radiators aren’t mass-produced — they’re precision-engineered using a 100-year-old lathe, giving each piece a story, a soul, and a finish that’s unlike anything else on the market. Ideal for projects that demand bespoke performance, subtle elegance, and robust British design.
| Product Code | Height (mm) | Width (mm) | Projection (mm) | Pipe Centres (mm) | Watts T50/T40 | BTUs T50/T40 | Heated Area m2 (T50) |
| HUTCH1000B | 1000 | 260 | 145 | 155 | 1100/825 | 3751/2814 | 12 |
| HUTCH1100B | 1100 | 260 | 145 | 155 | 1210/906 | 4126/3089 | 13 |
| HUTCH1200B | 1200 | 260 | 145 | 155 | 1320/990 | 4501/3376 | 14 |
| HUTCH1300B | 1300 | 260 | 145 | 155 | 1430/1073 | 4876/3659 | 15 |
| HUTCH1400B | 1400 | 260 | 145 | 155 | 1540/1155 | 5251/3939 | 17 |
| HUTCH1500B | 1500 | 260 | 145 | 155 | 1650/1238 | 5627/4222 | 18 |
| HUTCH1600B | 1600 | 260 | 145 | 155 | 1760/1320 | 6001/4501 | 19 |
| HUTCH1700B | 1700 | 260 | 145 | 155 | 1870/1403 | 6377/4784 | 20 |
| HUTCH1800B | 1800 | 260 | 145 | 155 | 1980/1485 | 6752/5064 | 22 |
| HUTCH1900B | 1900 | 260 | 145 | 155 | 2090/1568 | 7127/5347 | 23 |
| HUTCH2000B | 2000 | 260 | 145 | 155 | 2220/1665 | 7502/5678 | 25 |
| HUTCH2100B | 2100 | 260 | 145 | 155 | 2310/1733 | 7877/5910 | 26 |
| HUTCH2200B | 2200 | 260 | 145 | 155 | 2420/1815 | 8252/6189 | 27 |
| *HUTCH2300B | 2300 | 260 | 145 | 155 | *2530/1898 | 8627/6472 | 28 |
| *HUTCH2400B | 2400 | 260 | 145 | 155 | *2640/1980 | 9002/6752 | 29 |
| *HUTCH2500B | 2500 | 260 | 145 | 155 | *2750/2063 | 9378/7035 | 30 |
* Special Delivery or Collection Available
Is this radiator suitable for conversion to all electric?
Yes, please see related products
Do Finn radiators heat up using Microbore plastic pipes?
Microbore systems, typically using 8mm or 10mm plastic pipes, are a smaller diameter pipe compared to the traditional 15mm or 22mm copper pipework. Microbore systems have lower flow rates, considered to be a more energy efficient heating system. The Fin Radiators have been tested and work perfectly with Microbore boiler systems.
What are the wall to pipe centres?
For both wall and floor mounted installations the wall to pipe centres are 90mm.Â
What is the HS/Commodity Code for this item when exporting?
7322190000
How long do the Twin Finns take to heat up?
The Twin Finns are a big chunk of metal and classed as Steam Tubes, with thicker gauge steel walls than standard radiators. However within 5 minutes the twin finn will reach the temperature set. Standard central heating radiators steel wall can be less than <1mm. Twin Finn walls are >3mm, so the heat transfer is slower than standard radiators.Â
Will the Twin Finn rust if not painted?
Yes all steel products will rust in any environment and very quickly in humid spaces!
What is the output of the Finns?
The Finns are rated at 550 watts per 1 meter length, this is equal to 1,727 BTU/hr!
What's type of paint can be used for the Finns?
Metal primer paint should always be applied first then finished with any heat resistant type radiator paint!
Are the Finns noisy when they are working?
Very silent, zero noise in operation!
What valves do IÂ need for this radiator?
The Twin Finn radiators have standard 1/2 BSP fittings so all types of radiator valves are suitable. The Twin Finn is normally installed Vertically therefore you will need straight valves if your pipes are coming from the floor or corner valves if your pipes are coming from the wall.
Can you make bespoke Twin Finns?
Yes, the Twin Finns can be made to any Height, the connections can also be changed or moved on request. If you have a special design in mind we will certainly try to help.
Â
Our Delivery Charges and times are explained:
Delivery Charges
All deliveries have a standard charge of £9.50 + VAT up to 20kg. Where stated, certain products are delivered FREE of charge (mainland UK only*). Check the description of the desired product and if it says free delivery then you will not be charged for delivery*
Extra Charges
Where the weight is over 20kg we reserve the right to charge more dependent on product type and delivery postcode, our customer service team will be in touch and inform you of any extra charges before we despatch.
Delivery Times
All products will have a delivery time stated in their description. Next Working Day - these products will be delivered Next Working Day if ordered before 12.00, or in certain circumstances up until 4:00 pm. Please call if you require a Next Working Day and we will try our best to get it to you. Certain products will state within 48hrs, within 3 Days or within 5 days. These products will be delivered within the time stated. If you require delivery on a certain day please put this in the comments and we will aim to deliver on that day.
Certain products such as radiators are delivered after 5 working days, when purchasing a radiator please put in the desired delivery date which is 5 working days after ordering. In some cases, stock permitting, we can get radiators out sooner. Please call or put in the customer comments if you need something urgently and we will try our best.
Saturday Deliveries
We can arrange for a Saturday delivery for certain products, please call 01977 663331 for more details.
Please note: Although we will do our utmost to deliver your product in the time stated we cannot be held responsible for any unforeseen delays. Please do not book a plumber, electrician, etc until you have received the goods as we will not be held responsible for their time. Please read our terms and conditions for further details.
additional charges may be applicable dependent on your location please double-check with our customer service team



