IGNIS Digital Instant Water Heater 3.5kW
Â
- Digital Temperature Display
- Supplied with Standard or Push Fit flexi hoses
- Power: 3.5kW
- Energy Class Rating: A
- Cold Water Flow Regulator Supplied
IGNIS Digital Instant Water Heater – 3.5kW
The IGNIS 3.5kW Digital Instant Water Heater is a compact, space-saving solution for providing hot water on demand. Ideal for handwashing facilities in both commercial and domestic environments, its instantaneous heating design eliminates the need for a traditional hot water storage tank, making it particularly suitable for locations where space is limited.
Perfect for cloakrooms, offices, retail premises, factories, schools, universities, hospitals and modular buildings, the IGNIS combines practical performance with convenient digital controls. The integrated digital temperature display allows users to monitor the water temperature, while the touch-sensitive controls provide accurate and convenient temperature adjustment.
Designed for installation flexibility, the IGNIS can be installed in any orientation, including horizontally or flat, making it suitable for a variety of installation requirements where space and positioning may be restricted.
Digital Temperature Display and Control
The IGNIS features a clear digital temperature display and touch-sensitive controls, allowing users to monitor and adjust the temperature to suit their requirements. An adjustable flow control valve is supplied to help regulate the water flow and achieve the desired outlet temperature, taking into account seasonal variations in incoming cold water temperature.
Compact, Instantaneous Hot Water
With a 3.5kW heating element, the IGNIS heats water as it passes through the unit rather than storing hot water in a conventional tank. This makes it a practical choice for point-of-use handwashing applications where a compact, dedicated hot water supply is required.
As a guide, a flow rate of approximately 2 litres per minute or less may be required to achieve a suitable temperature rise, depending on the incoming water temperature and operating conditions. A spray nozzle is supplied to help regulate the flow and assist in achieving the desired water temperature and performance.
Thermal Safety Protection
For added safety, the IGNIS incorporates a thermal reset switch located at the rear of the water heater. This thermal cut-out acts as a high-limit safety device and automatically interrupts the power supply if the internal water temperature exceeds 55°C. The reset switch can be operated in accordance with the manufacturer's instructions once the cause of the over-temperature condition has been investigated and resolved.
Seasonal Temperature Adjustment
Incoming cold water temperatures vary throughout the year and can affect the final outlet temperature. During winter, incoming water temperatures may fall to 10°C or below, while summer temperatures may rise above 15°C.
The supplied adjustable flow control valve allows the water flow to be regulated to help compensate for these seasonal changes. Reducing the flow rate generally allows a greater temperature rise, while increasing the flow rate reduces the temperature rise. Adjusting the flow to suit the incoming water temperature helps achieve a comfortable outlet temperature within the heater's operating limits.
Connection Hose Options
To suit different installation requirements, customers can select their preferred hose connections when ordering. The available options are:
- Standard 1/2-inch BSP flexible hoses – a conventional flexible connection option.
- 1/2-inch push-fit hoses – an alternative connection option for compatible installations.
Please select your preferred hose fittings from the available options on the product page when placing your order.
Key Features and Specifications
- Product Type: Digital Instantaneous Water Heater
- Rated Power: 3.5kW
- Temperature Display: Integrated digital display
- Controls: Touch-sensitive digital temperature control
- Heating Method: Instantaneous heating without a conventional storage tank
- Installation Orientation: Any orientation, including horizontal or flat installation
- Safety Feature: Thermal reset switch with a >55°C cut-out threshold
- Flow Control: Adjustable flow control valve supplied
- Spray Nozzle: Supplied
- Guide Flow Rate: Approximately 2 litres per minute or less, depending on incoming water temperature and required temperature rise
- Inlet and Outlet Connections: 1/2 inch
- Hose Options: Standard 1/2-inch BSP flexible hoses or 1/2-inch push-fit hoses, selectable when ordering
- Energy Rating: A, as specified for this product
- Standards Listed: EN 60335-2-35:2016, EN 60335-1, EN 62233:2008
Installation Information
The IGNIS 3.5kW Digital Instant Water Heater is designed for low-flow, point-of-use applications, particularly handwashing facilities. The achievable outlet temperature depends on the incoming cold water temperature and the flow rate through the heater. The suggested flow rate of approximately 2 litres per minute is a guide and should be adjusted to suit the installation and desired outlet temperature.
Installation must be carried out in accordance with the manufacturer's instructions and applicable electrical and plumbing regulations. Ensure that the electrical supply, water pressure, connections and selected hose fittings are suitable for the installation. Always consult the product installation manual before installation, adjustment or resetting the thermal cut-out.
| SKUÂ | IGNIS35 |
|---|---|
| Type | Digital Instant Water Heater |
| Power (kW) | 3.5 |
| Current Intensity (A) | 15.2 |
| Minimum Cable Size (mm) | 1.5 |
| Minimum Water Pressure (Bar) | 0.6Â |
| Maximum Water Pressure (Bar) | 6.5Â Â |
| 48C Flow Rates (l/min) * | 1.5 |
| 40C Flow Rates (l/min) * | 2.0 |
| 35C Flow Rates (l/min) * | 2.5 |
| Height / Width / Projection (mm) | 163 / 215 /Â 55 |
| Installation | Any Orientation |
| Water Proof Rating (IP) | 24 |
| Cable Length (mm) | 680 |
| Thermal Reset Switch | Rear of water heater |
| Operation Standards | EN: 60335-2-35:2016, EN: 60355-1-A1/A2/A11/A13/A14,   EN: 62233: 2008 |
| GTIN | 5902734851871 |
1. Does the IGNIS 3.5kW water heater provide instant hot water?
Yes. The IGNIS heats water as it passes through the unit, eliminating the need for a conventional hot water storage tank. It is ideal for point-of-use handwashing facilities where hot water is required on demand.
2. Can the IGNIS water heater be connected to a standard 13 amp plug?
No. The IGNIS has a rated power of 3.5kW, drawing approximately 15.2 amps at 230V. It must be permanently hardwired to a suitable electrical supply by a qualified electrician. It must not be connected using a standard 13 amp plug.
3. Can the IGNIS water heater be installed horizontally or flat?
Yes. The IGNIS is designed to allow installation in different orientations, including horizontal and flat positioning. This provides flexibility when installing the heater beneath sinks or in areas where space is restricted. Always follow the manufacturer's installation instructions.
4. How hot will the water get?
The outlet temperature depends on the incoming cold water temperature and the flow rate through the heater. Reducing the flow rate increases the temperature rise, while increasing the flow rate reduces it. The IGNIS incorporates a thermal safety cut-out designed to interrupt power if the internal water temperature exceeds 55°C.
5. Why is the water cooler during winter?
During winter, incoming mains water can be considerably colder than during summer. As the IGNIS has a fixed maximum heating power of 3.5kW, colder incoming water results in a lower outlet temperature at the same flow rate. The supplied adjustable flow control valve allows the flow to be reduced to help compensate for seasonal temperature changes.
6. What water flow rate is recommended?
For effective handwashing performance, a flow rate of approximately 2 litres per minute or less may be required, depending on the incoming water temperature. The supplied flow control valve and spray nozzle help regulate water delivery and achieve a suitable temperature rise.
7. Is the IGNIS suitable for commercial washrooms?
Yes. The IGNIS is suitable for low-flow handwashing applications in offices, factories, schools, universities, retail premises, modular buildings and other commercial environments. Its compact design makes it particularly useful where space beneath a washbasin is limited.
8. Can the IGNIS supply hot water to a shower or bath?
The IGNIS is primarily designed for low-flow, point-of-use handwashing applications. Its 3.5kW output is not generally suitable for applications requiring higher volumes of hot water, such as conventional showers or filling baths.
9. What happens if the water heater overheats?
The IGNIS incorporates a thermal safety cut-out which interrupts the electrical supply to the heating element if the internal temperature exceeds 55°C. A reset switch is located at the rear of the unit. The cause of overheating must be investigated and corrected before the heater is reset, following the manufacturer's instructions.
10. Does the IGNIS water heater need a hot water storage tank?
No. The IGNIS is an instantaneous water heater, meaning it heats incoming cold water directly as required. No separate hot water cylinder or storage tank is necessary for its intended point-of-use application.
11. What plumbing connections are available?
The IGNIS features 1/2-inch inlet and outlet connections. Customers can select either standard 1/2-inch BSP flexible hoses or compatible 1/2-inch push-fit hose connections when ordering. The cold water inlet is positioned on the right and the hot water outlet on the left when viewing the unit from the front in its normal upright position.
12. Is an instant water heater energy efficient?
Instantaneous water heaters only heat water when there is a demand, avoiding the standing heat losses associated with storing hot water in a conventional cylinder. The IGNIS has an energy rating of A and is designed to provide efficient point-of-use hot water for low-flow handwashing applications.
Our Delivery Charges and times are explained:
Delivery Charges
All deliveries have a standard charge of £9.50 + VAT up to 20kg. Where stated, certain products are delivered FREE of charge (mainland UK only*). Check the description of the desired product and if it says free delivery then you will not be charged for delivery*
Extra Charges
Where the weight is over 20kg we reserve the right to charge more dependent on product type and delivery postcode, our customer service team will be in touch and inform you of any extra charges before we despatch.
Delivery Times
All products will have a delivery time stated in their description. Next Working Day - these products will be delivered Next Working Day if ordered before 12.00, or in certain circumstances up until 4:00 pm. Please call if you require a Next Working Day and we will try our best to get it to you. Certain products will state within 48hrs, within 3 Days or within 5 days. These products will be delivered within the time stated. If you require delivery on a certain day please put this in the comments and we will aim to deliver on that day.
Certain products such as radiators are delivered after 5 working days, when purchasing a radiator please put in the desired delivery date which is 5 working days after ordering. In some cases, stock permitting, we can get radiators out sooner. Please call or put in the customer comments if you need something urgently and we will try our best.
Saturday Deliveries
We can arrange for a Saturday delivery for certain products, please call 01977 663331 for more details.
Please note: Although we will do our utmost to deliver your product in the time stated we cannot be held responsible for any unforeseen delays. Please do not book a plumber, electrician, etc until you have received the goods as we will not be held responsible for their time. Please read our terms and conditions for further details.
additional charges may be applicable dependent on your location please double-check with our customer service team