Apply for a Trade Account Here

Twin Finn Hutchinson Central Heating Designer Radiator - Custom Colour

£672.00 £560.00
In stock
Only %1 left
Delivery Time:
7-14 Working Days
Warranty:
25 Years
Quick Code:
20096
Order Line:
01977 663331
  • 100% Plastic Free Packaging
  • Central heating wet system radiator
  • Often used in commercial premises, or areas where space is limited
  • Supplied complete with steel wall - floor supports
  • Outputs from 3,454 to 7,090 BTU/hr
  • Finns are Ideal for lower flow rate Boiler Systems

Twin Finn Hutchinson Central Heating Designer Radiator - Custom Colour

 

Twin Finn Central Heating Designer Radiator in any RAL colour, is ideal for bespoke installations and can be floor or wall mounted. Due to their increased internal water volume and efficient heat transfer, twin finn radiators perform particularly well with heat pump systems, helping to maintain steady output at lower flow temperatures. 
 
Fin radiators are fully compatible with: Gas, Oil, LPG, and electric boiler systems. This makes finn radiators a reliable and versatile heating solution for both traditional boiler installations and modern low-temperature systems. Compatible with any type of wet heating system, this radiator is well suited for heating areas that require a bespoke feature wall, yet effective heating solutions.
 

With modern properties increasingly utilising 8–10mm microbore pipework, Twin Finn radiators are engineered to operate efficiently within these systems, providing optimal heat transfer and reliable performance.

This radiator is often used in rooms where space is an issue, maximum width 260mm. Supplied with 3 x integral floor wall support fixings. The Finns are spaced evenly 10mm apart on average 90 Finns per meter length. 

Lead times are 7-10 working days. The Hutchinson is designed to be installed vertically on solid walls with the use of standard 1/2 BSP radiator valves. Can also be installed Horizontally if preferred. 
 
 
  • 100% Plastic Free Packaging
  • Illustration image Polished Copper
  • Finns work perfectly with 8-10mm Microbore Boiler Systems
  • See downloads section for technical drawings
  • Central heating wet system radiator
  • Often used in commercial premises, or areas where space is limited
  • Supplied complete with welded steel wall - floor supports
  • Outputs from 3,454 to 7,090 BTU/hr
  • 3 x steel wall fixing brackets
  • Bespoke sizes available on request 

 

Please note: Finn Radiators aren’t mass-produced — they’re precision-engineered using a 100-year-old lathe, giving each piece a story, a soul, and a finish that’s unlike anything else on the market. Ideal for projects that demand bespoke performance, subtle elegance, and robust British design.

 

 

Product Code Height (mm) Width (mm) Projection (mm) Pipe Centres (mm) Watts BTUs Heated Area m²
HUTCH1000CC 1000 260 145 155 1100 3751 12
HUTCH1100CC 1100 260 145 155 1210 4126 13
HUTCH1200CC 1200 260 145 155 1320 4501 14
HUTCH1300CC 1300 260 145 155 1430 4876 15
HUTCH1400CC 1400 260 145 155 1540 5251 17
HUTCH1500CC 1500 260 145 155 1650 5627 18
HUTCH1600CC 1600 260 145 155 1760 6001 19
HUTCH1700CC 1700 260 145 155 1870 6377 20
HUTCH1800CC 1800 260 145 155 1980 6752 22
HUTCH1900CC 1900 260 145 155 2090 7127 23
HUTCH2000CC 2000 260 145 155 2220 7502 25
HUTCH2100CC 2100 260 145 155 2310 7877 26
HUTCH2200CC 2200 260 145 155 2420 8252 27
HUTCH2300CC 2300 260 145 155 2530 8627 28
HUTCH2400CC 2400 260 145 155 2640 9002 29
HUTCH2500CC 2500 260 145 155 2750 9378 30

 

* Special Delivery or Collection Available

Do Finn radiators heat up using Microbore plastic pipes?

Microbore systems, typically using 8mm or 10mm plastic pipes, are a smaller diameter pipe compared to the traditional 15mm or 22mm copper pipework. Microbore systems have lower flow rates, considered to be a more energy efficient heating system. The Fin Radiators have been tested and work perfectly with Microbore boiler systems.

What are the wall to pipe centres?

For both wall and floor mounted installations the wall to pipe centres are 90mm. 

What is the HS/Commodity Code for this item when exporting?

7322190000

How long do the Twin Finns take to heat up?

The Twin Finns are a big chunk of metal and classed as Steam Tubes, with thicker gauge steel walls than standard radiators. However within 5 minutes the twin finn will reach the temperature set. Standard central heating radiators steel wall can be less than <1mm. Twin Finn walls are >3mm, so the heat transfer is slower than standard radiators. 

Will the Twin Finn rust if not painted?

Yes all steel products will rust in any environment and very quickly in humid spaces!

What is the output of the Finns?

The Finns are rated at 550 watts per 1 meter length, this is equal to 1,727 BTU/hr!

What's type of paint can be used for the Finns?

Metal primer paint should always be applied first then finished with any heat resistant type radiator paint!

Are the Finns noisy when they are working?

Very silent, zero noise in operation!

What valves do I need for this radiator?

The Twin Finn radiators have standard 1/2 BSP fittings so all types of radiator valves are suitable. The Twin Finn is normally installed Vertically therefore you will need straight valves if your pipes are coming from the floor or corner valves if your pipes are coming from the wall.

Can you make bespoke Twin Finns?

Yes, the Twin Finns can be made to any Height, the connections can also be changed or moved on request. If you have a special design in mind we will certainly try to help.

 

Our Delivery Charges and times are explained:

 

Delivery Charges
All deliveries have a standard charge of £9.50 + VAT up to 20kg. Where stated, certain products are delivered FREE of charge (mainland UK only*). Check the description of the desired product and if it says free delivery then you will not be charged for delivery*

Extra Charges
Where the weight is over 20kg we reserve the right to charge more dependent on product type and delivery postcode, our customer service team will be in touch and inform you of any extra charges before we despatch.

Delivery Times
All products will have a delivery time stated in their description. Next Working Day - these products will be delivered Next Working Day if ordered before 12.00, or in certain circumstances up until 4:00 pm. Please call if you require a Next Working Day and we will try our best to get it to you. Certain products will state within 48hrs, within 3 Days or within 5 days. These products will be delivered within the time stated. If you require delivery on a certain day please put this in the comments and we will aim to deliver on that day.

Certain products such as radiators are delivered after 5 working days, when purchasing a radiator please put in the desired delivery date which is 5 working days after ordering. In some cases, stock permitting, we can get radiators out sooner. Please call or put in the customer comments if you need something urgently and we will try our best.

Saturday Deliveries
We can arrange for a Saturday delivery for certain products, please call 01977 663331 for more details.

Please note: Although we will do our utmost to deliver your product in the time stated we cannot be held responsible for any unforeseen delays. Please do not book a plumber, electrician, etc until you have received the goods as we will not be held responsible for their time. Please read our terms and conditions for further details.

additional charges may be applicable dependent on your location please double-check with our customer service team

Our Returns Policy - Please click here!