shopping basket
basket
item - £0.00

You have no items in your shopping basket.

Subtotal
£0.00

CORGI Underfloor Heating Cable 600W Area Coverage 3m2 - UFCAB600

More Views

CORGI Underfloor Heating Cable 600W Area Coverage 3m2

Be the first to review this product

Quick Code: # 18865
£67.00 ex. VAT £80.40 incl. VAT

Availability: In stock

Warranty: 10 Year
Delivery: 48 Hours
FREE Delivery
  • Perfect for use under tiles, carpets, vinyl and laminate floors
  • Approved to: EN 60335-1:1998, EN 60335-2-17:1999,IEC 60730
  • Cable: Length 35.3m
  • Ohms Value +/- 10%: 95 Ω
  • Wire type: Dual conductor/single cold tail
  • IP Rating: IPX7 (as required by the 17th Edition)

Details

Easy to install meets current building regulations

CORGI heating cables are perfect for providing luxurious underfloor heating beneath virtually any floor surface and are particularly well suited to installation in larger rooms. The cables can be installed directly beneath a tiled floor or almost any other floor covering if covered with a levelling compound first. If your room is a high heat loss/poorly insulated area such as a conservatory we recommend installing the cable at 200W per sqm. If your room meets current building regulations 150W per sqm should provide full room heating.


All heating cables must be connected in parallel not in series. Make sure you never cut, shorten, lengthen, strain or cross heating cables. You must always ensure the floor sensor is not fitted near another heat source such as a radiator pipe or where rugs, mats or furniture are expected to be placed on top of the floor. Start laying the cable at a point close to the thermostat to make the connection simple. Continue to lay your heating cable at the desired spacing taking care not to place any cable closer than 30mm to conductive parts or other heating cables.

  • Easy to install
  • Perfect for use under tiles, carpets, vinyl and laminate floors
  • The floor base must be firm, level, and free of dust, dirt and oil
  • Constructed with a 3mm cable – extremely low build height
  • Dual conductor/single cold tail
  • All heating cables must be connected in parallel not in series!
  • IP Rating: IPX7 (as required by the 17th Edition)
  • Fully 17th Edition and Part L compliant
  • Cable: Length 35.3m
  • Ohms Value +/- 10%: 95 Ω
  • Approved to: EN 60335-1:1998, EN 60335-2-17:1999, IEC 60730
  • UFCAB600: Area Coverage 3.0m2
  • Additional Information

    SKUUFCAB600
    Weight7.0000
    BrandCORGI
    GTINNo
    Power (kW)No
    Code
    Unit Power
    Coverage at 150W/sqm
    Cable Length (m)
    Coverage at 200W/sqm
    Cable Height (mm)
    Ohms Value +/- 10%
    UFCAB600
    600W
    4.0m2
    35.3m
    3m
    3mm
    95 Ω
    View FileUFCAB600 Manual    Size: (688.07 KB)

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    Customer Reviews