Elson EUV10 Unvented Water Heater 10Ltr 2.2kW

No expansion kit is required

The Elson EUV range of unvented water heaters are available in 10ltr and 15ltr capacities. The 10ltr would be suitable for a small sink or two hand wash basin where the 15ltr would be suitable for a busy kitchen sink or three hand wash basins simultaneously. Both capacities are 2.2kW therefore they can be connected to a 13A fused power supply via a double pole isolating switch. Expansion vessel is not required "PROVIDED THAT" both the cold main supply backflow is not prevented by any stop valve or check valve and the hot water outlet does not branch back into the cold mains supply! No expansion kit is required for the 10ltr water heater if mains cold water supply is 2.8m (10ft) long without any stop valves!

Connected to mains water supply giving full mains pressure up to 6bar

Temperature control ranges from 12C to 72C

Maximum working pressure 6bar

10ltr Weight: 6.5kg (empty) 16.5kg (full)

Waterproof rating: IPX2

Must be installed under sink only!

Plumbing: 15mm copper pipe compression fittings

Can be used with standard mixers and taps

1m of power cable supplied

Domestic use: Sinks, basins, annex - conversions, cloakrooms, utility rooms!

Commercial use: Cafes, small industrial units, surgeries, airports, portacabins, building Sites!

Power: 2kW - 220-240V -50Hz - 13A

Designed for a quick and easy installation